An Introduction to the ElectricKit Classic
Can my Cooker be Converted?
Purpose Built Pre & Post 74
- Bigger ashpit door with air vents at the top and a bigger opening
- Originally built to either run on gas or oil
- The most popular of 3 styles
- Conversions available for 2, 3 (No screen, stats only) & 4 oven cookers
Solid Fuel Standard (Traditional 1941-1972)
- Small ash pit door and smaller opening
- Originally built to run on solid fuel
- Flat aga top
- Rectangle shaped air vent under the ashpit door.
- May still have its air lever from when it ran on solid fuel
- Conversions available for 2 & 4 oven cookers
- Unfortunately this does not include the older standard cookers (1936-1841 & earlier)
Solid Fuel Deluxe Pre & Post 74
- Bigger ash pit door (no vents) with smaller opening.
- Originally built to run on solid fuel
- Air wheel or blanking plate in top left corner
- Conversions available for 2 & 4 oven cookers
Why choose ElectricKit Classic
Enhancements Include
- Faster heat up times
- Improved economy
- Upgraded hob temperature modulation (Solid Hobs)
- Enhanced heat distribution within the roasting oven
- Increased bottom oven temperature & its controllability
Optional Upgrades
- Induction Hob (left hob only)
- Zonal oven on-off & timer control (with the use of the Wi-Fi oven control)
- Compatible with “Amazon Alexa” & “Google Home”, via the optional Wi-Fi oven control
How the ElectricKit Classic Works?
2 & 4 Oven Cookers
Right Hand Ovens
Your desired temperature of the top oven can be set via the display (oven temperature range ambient to 280oC). Once set and if the oven requires heat, the top and middle oven elements energise heating both ovens. Under stable constant running conditions, the bottom oven runs at approximately 65% of the top oven temperature and this temperature can also be reduced with the use of a cold shelf.
The ElectricKit Classic top oven elements have been carefully balanced to enhance and provide a uniform heat distribution throughout the top oven, this brings a much improved cooking experience which is more comparable to an original oil or gas cast iron range.
The bottom oven element is controlled by the bottom right thermostat on the control panel, the use of this element can be used to accelerate the bottom oven heat up time and also raise the oven temperature further so that it can be used to bake or roast.
Left Hand Ovens (Warming Oven for a 4 oven cooker)
The left hand ovens are controlled by the bottom left thermostat on the control panel (top left oven temperature range ambient to 130oC). The heating element is sited in the duct on the side of these ovens, allowing the hot air to circulate through the ovens as they were originally designed.
Hob Plates
The ElectricKit Classic features two independent & fully controllable hob plates, each hob is controlled by it’s own thermostat on the control panel. This enables you to choose whether you require one or both of the hobs to be running and set each hob to the required heat, whether that be frying, boiling or simmer!
How the 3 Oven ElectricKit Classic Works
We also have a conversion kit for 3 oven cookers, sporting the same independent hobs as our other models (Illustrated above).
The top right hand oven is control by a dial with settings 1-8. This activates the top and the middle oven elements together.
The left hand ovens are also controlled by a 1-8 dial allowing this oven to get up to baking and roasting temperature. The element is situated below the left hand bottom oven.
User Manuals
We have a selection of user manuals available to download as PDF files. Please use the links below to download the manuals you require.
